Led strip with lateral lighting 120 leds/m 1000 Lumens/m waterproof IP65

Ref : SV1C3014-120-IP65 [#116]

Rating: Sign in to write a review

€52.53

5 meter led strip with side lighting SMD3014 12V 120 leds/m 1000 Lumens/m not waterproof IP20

Color

Cool white
Pure white
Warm white

PCB

Quantity

On demand. Shipping 20 to 30 days.

Accessories to compose your kit

Led strips accessories

	Transformer for led strips 12V 7A 84W on socket	Power supply 12V 7A 84W €14.58
	Led dimmer with remote control Radio frequency 12A	Led dimmer with 144W remote control €16.87
	WiFi and Internet led controller and dimmer for white led ribbons, single colors, RGB, RGBW and RGB + CCT	WiFi and Internet led controller €21.68
	DMX led controller for white or single color led strips, spotlights and spotlights	1 channel DMX led controller for white or single color led strip €25.00

Products guaranteed for 3 or 5 years

Products shipped from France

Satisfied or refunded

Return within 14 days

Characteristics - Selection criteria

Ultra-low consumption :	No
Type of lighting :	Lighting
Color :	White
Voltage :	12V
Waterproof :	Waterproof IP65
Lighting direction :	Side view

This led strip has the particularity of lighting from the side and not from the front like on a classic strip.
It is used for vehicle headlights or when lighting must be done on the side of the band.

With its brightness of up to 1000 Lumens per meter, the tape can be used as main lighting, or as mood lighting by using a dimmer to reduce its brightness.

The strip is powered by 12V DC and can be cut in groups of 3 LEDs, i.e. every 2.5 cm.

Waterproof, it can be used both indoors and outdoors, or in car headlights.
It can also be used in damp rooms, but must not be immersed.

Compose your kit ready to use

Strip only	For the ribbon to work, you must have a power supply 12V 100W minimum. If you do not already have one, you must add a power supply to the essential accessories. Otherwise, you can acquire the ribbon alone.
Power supply kit + ribbon +	Minimal kit to make your led strip work. It connects to the 230V mains and the led strip to the 12/24V output of the power supply. Add the power supply to the list of accessories.
Kit power supply + drive + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 dimmer with remote control You will get a complete kit supplied with a remote control to turn on, off and vary the light intensity using the radio-frequency remote control.
Power supply kit + Wifi dimmer + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 WiFi dimmer With this complete kit, you can turn on, turn off and vary the light intensity in Wifi using your phone or tablet.
Power supply kit + DMX dimmer + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 DMX dimmer Complete kit operating in DMX (excluding console). The DMX controller allows you to turn on, off and vary the light intensity according to the signal sent by your DMX console. Only 1 channel is required to drive the led strip. LTech brand controller intended for professionals for intensive and long-lasting use.

Choose waterproofing

IP20Not waterproof. Suitable for indoor use (living rooms, bedrooms, verandas), excluding kitchens and bathrooms.
IP65 Resists splashing water and damp environments. Can be installed in a kitchen, bathroom or outdoors.
IP68Immersible. Can be used in swimming pools, SPA or ponds.

Equipment guaranteed for 5 years intended for professionals and individuals for intensive use.

Power supply voltage	12V DC
Led type	SMD 3014
Number of leds per meter	120
Colors	Natural white 4000K Warm white 3000K, cool white 6000K
Brightness	1000 Lumens per meter (in cool white) 840 Lumens per meter in warm white
Efficacy	69 Lumens per Watt
Consumption	14.4W per meter
Dimmable	Yes (PWM)
Attenuation	2% after 6000 hours
CRI	80

Illumination angle	120°
Lifespan	50000 hours (at 45°C)
Sealing	Waterproof IP65
Dimensions	5000x8x2mm
Cut	Every 2.5cm
Temperature range	-25 to 45°C
PCB	1oz (35u) copper
Adhesive	3M VHB
Certifications	CE, RoHS EN60598-2-20:2015 EN 60598-1:2015 EN 62471:2008 EN 62493:2015 EN 62031:2008 +A1:2013 +A2:2015
Warranty	5 years

Wiring white and single color

ribbons

These headbands, the simplest, have only 2 wires (+ and -).
They can be connected directly to the 12 or 24V power supply. In this case, the wall switch in your home will be used to turn the lighting on and off.

Connection of a single color led strip to power supply

They can be paired with a dimmer to turn on, off and vary the brightness with a remote control.

Connection of a single color led strip with dimmer

With the exception of certain models (specified in the product sheet), LED strips can only have a maximum length of 5 meters.
Beyond this length, there would be a loss of light intensity after the first 5 meters.

To overcome this, it is possible to arrange several lengths of 5 meters (or less), one after the other, by connecting them in parallel to the power supply or the controller.

Here is the wiring diagram of multiple strips with the use of a dimmer. The latter will act on all the ribbons, including those connected after the amplifier.

Connection of 2 led strips in parallel with amplifier

Precautions to take when handling and installing a led strip

The led strips can be curved lengthwise by describing a minimum radius of 5 cm.
Under no circumstances can they be folded sideways.

If you need to make 90° angles, it is essential to cut the tape in sections and connect them, either with a suitable angle connector, or better, by welding flexible cable (flat cable) between the 2 sections.