Side-lit COB led strip 4mm 378 leds/m 500 Lumens/m

Ref : COB378LAT [#137]

Rating: Sign in to write a review

€74.17

5 meter COB led strip, 24V, 378 leds/m, 500 Lumens/m, 3 mm wide

Side scattering of light
378 leds/m for uniform light distribution

Color

Cool white
Pure white
Warm white

Quantity

On demand. Shipping 20 to 30 days.

Accessories to compose your kit

Led strips accessories

	Transformer for 24V 5A 120W led strips on terminal block	24V 5A 120W power supply €11.46
	Led dimmer with remote control Radio frequency 12A	Led dimmer with 144W remote control €16.87
	WiFi and Internet led controller and dimmer for white led ribbons, single colors, RGB, RGBW and RGB + CCT	WiFi and Internet led controller €21.68
	DMX led controller for white or single color led strips, spotlights and spotlights	1 channel DMX led controller for white or single color led strip €25.00

Products guaranteed for 3 or 5 years

Products shipped from France

Satisfied or refunded

Return within 14 days

Characteristics - Selection criteria

Ultra-low consumption :	No
Type of lighting :	Atmosphere and decor
Color :	White
Voltage :	24V
Waterproof :	Not waterproof
Strip type :	Single color
Lighting direction :	Side view

This lateral lighting COB led strip allows you to create a light decoration with equal distribution of light over its entire length.
The advantage of this headband with lighting on the side, is that it can be bent to form any shape, which is not possible with the strips with lighting frontal.

Less rigid than a flexible neon, it will position itself more easily and accept tighter angles in curves.

It can be used for a discreet decoration of fine light (3 mm), to highlight an object, a mirror, or for markup.

The only 3mm wide strip is powered by 24V DC and can be cut every 55mm.

Not waterproof, it can only be used indoors.

Compose your kit ready to use

Strip only	For the ribbon to work, you must have a power supply 12V 65W minimum. If you do not already have one, you must add a power supply to the essential accessories. Otherwise, you can acquire the ribbon alone.
Power supply kit + ribbon +	Minimal kit to make your led strip work. It connects to the 230V mains and the led strip to the 24V output of the power supply. Add the power supply to the list of accessories.
Kit power supply + drive + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 dimmer with remote control You will get a complete kit supplied with a remote control to turn on, off and vary the light intensity using the radio-frequency remote control.
Power supply kit + Wifi dimmer + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 WiFi dimmer With this complete kit, you can turn on, turn off and vary the light intensity in Wifi using your phone or tablet.
Power supply kit + DMX dimmer + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 DMX dimmer Complete kit operating in DMX (excluding console). The DMX controller allows you to turn on, off and vary the light intensity according to the signal sent by your DMX console. Only 1 channel is required to drive the led strip. LTech brand controller intended for professionals for intensive and long-lasting use.

Hardware guaranteed for 3 years.

Power supply voltage	24V DC
Led type	COB. Side lighting (on the side)
Number of leds per meter	378
Colors	Natural white 4000K Warm white 2700K, cool white 6500K
Brightness	500 to 550 Lumens per meter
Efficacy	50 Lumens per Watt
Consumption	10W per meter
Dimmable	Yes (PWM)
Attenuation	2% after 6000 hours
CRI	92

Illumination angle	120°
Lifespan	50000 hours (at 45°C)
Sealing	Not waterproof IP20
Dimensions	5000x10x3mm
Cut	Every 55mm
Temperature range	-25 to 45°C
PCB	1oz (35u) copper
Adhesive	3M VHB
Certifications	CE, RoHS EN55015:2013/A1:2015 EN61547:2009 EN61000-3-2:2014 EN61000-3-3: 2013
Warranty	3 years

Wiring white and single color ribbons

These headbands, the simplest, have only 2 wires (+ and -).
They can be connected directly to the 12 or 24V power supply. In this case, the wall switch in your home will be used to turn the lighting on and off.

They can be paired with a dimmer to turn on, off and vary the brightness with a remote control.

With the exception of certain models (specified in the product sheet), LED strips can only have a maximum length of 5 meters.
Beyond this length, there would be a loss of light intensity after the first 5 meters.

To overcome this, it is possible to arrange several lengths of 5 meters (or less), one after the other, by connecting them in parallel to the power supply or the controller.

Here is the wiring diagram of multiple strips with the use of a dimmer. The latter will act on all the ribbons, including those connected after the amplifier.

Connection of 2 led strips in parallel with amplifier

Precautions to take when handling and installing a led strip

The led strips can be curved lengthwise by describing a minimum radius of 5 cm.
Under no circumstances can they be folded sideways.

If you need to make 90° angles, it is imperative to cut the tape into sections and connect them, either with a suitable angle connector, or better, by welding flexible cable (flat cable) between the 2 sections.