ULTRA-LOW ENERGY LED STRIP 180 LEDS/M 2400 LUMENS/M - 250 Lumens/W

Developed in 2025 and available for sale in 2026, this next-generation LED strip stands out with an exceptional luminous efficacy of 250 lumens per watt consumed. It far outperforms standard LED strips, whose efficiency generally ranges between 90 and 120 lumens per watt.

Thanks to its unrivalled energy performance in 2026, this strip is an ideal solution to reduce by at least 50% your energy consumption dedicated to lighting, while maintaining optimal brightness.

In a context where energy savings are essential — both for environmental protection and for controlling rising electricity costs — this high-efficiency LED strip is a sustainable and economical choice.

With a light output of 2400 lumens per meter, it provides powerful lighting, perfect for large spaces, spacious living rooms or areas requiring powerful illumination.

Operating at 24V DC, the strip can be cut every (in groups of 9 LEDs).

This LED strip model is equipped with 3 safety devices:

• - Overvoltage protection
• - Short-circuit protection
• - Overheating protection. A temperature sensor automatically reduces the voltage in case of overheating. This prevents any damage to the strip in the event of excessively high temperatures.

It is available in several colour temperatures: 2700K (very warm white), 3000K (warm white), 4000K (neutral white) and 6000K (daylight white).

Choose a complete kit

Strip only	You must have a 230V AC / 12 or 24V DC power supply. The LED strip connects directly to the 12/24V output.
Power supply + strip kit +	Minimal kit to operate your LED strip. It connects to the 230V mains and the LED strip connects to the 12/24V output of the power supply.
Power supply + dimmer + strip kit + +	This is a complete kit supplied with a remote control to switch on, switch off and dim the light intensity using the radio-frequency remote control.
Power supply + Wifi dimmer + strip kit + +	Complete kit to switch on, switch off and dim the light intensity over Wifi using your phone or tablet.
Power supply + DMX dimmer + strip kit + +	Complete kit operating in DMX (excluding console). The controller allows you to switch on, switch off and dim the light intensity according to the signal sent by your DMX console. Only 1 channel is required to control the LED strip. LTech brand controller designed for professionals for intensive and long-lasting use.

Wiring of white and single-colour LED strips

These strips, the simplest ones, have only 2 wires (+ and -).
They can be connected directly to the 12 or 24V power supply. In this case, the wall switch in your home will be used to switch the lighting on and off.

They can be coupled with a dimmer to switch on, switch off and adjust the brightness using a remote control.

With the exception of certain models (specified in the product sheet), LED strips can only have a maximum length of 5 meters.
Beyond this length, there would be a loss of light intensity after the first 5 meters.

To overcome this, it is possible to install several lengths of 5 meters (or less), one after the other, connecting them in parallel to the power supply or controller.

Here is the wiring diagram for several strips using a dimmer. The latter will act on all the strips, including those connected after the amplifier.

Precautions when handling and installing an LED strip

LED strips can be bent lengthwise with a minimum radius of 5 cm.
They must never be bent sideways.

If you need to make 90° angles, it is essential to cut the strip into sections and connect them either with a suitable corner connector, or preferably by soldering flexible cable (flat ribbon) between the 2 sections.

Do not bend the LED strips or subject them to distortion:

Choosing an LED strip

How to choose the LED strip best suited to your needs?

To quickly and easily find the LED strip that will best suit
your lighting project, consult our guide