DMX controller for LTECH dynamic effect led strips

This LTECH brand controller is designed for heavy duty professional use .
It works in DMX and allows you to control the Magic led strips (dynamic effects).

It is compatible with IC WS2811, WS2812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, TM1803, TM1804, TM1809 and TM1812.

DMX input on terminal block or XLR-3.
Protection against reverse polarity, overload and short circuits.

The controller is not waterproof and must be used away from splashing water or excessive humidity.

Important: Magic led tapes require 3 DMX channels per pixel :
channel 0 for the red of the first pixel, channel 1 for the green of the first pixel, channel 2 for the blue of the first pixel
channel 3 for the red of the second pixel, channel 4 for the green of the second pixel, channel 5 for the blue of the second pixel
and so on.

The 60 leds / m strips, with 3 LEDs per pixel will therefore need 60 DMX channels per meter.
The strips in 60 leds / m, with 1 led per pixel will therefore need 180 DMX channels per meter.

The DMX sequences can thus lead to totally personalized animations to obtain chaser effects with gradients, water drop effects, scrolls in all directions and rainbow effects ...

Each led strip must be supplied with power by connecting them to a 12V power supply of adequate power.

Ltech LT-1809 DMX controller user manual