8-Output LED Controller - SD Card + Remote Control for Dynamic Effect LED Strips

Ref : K8000C   [#190]
€269.65
   Tax excluded
  • Controller for dynamic LED strips
  • 8 outputs, each capable of controlling 1024 pixels
  • Works via DMX or with the LedEdit-K application (on PC)
  • Standalone operation from SD card
  • Remote control
Quantity
On demand. Shipping 20 to 30 days.

 

Products guaranteed for 3 or 5 years

  Satisfied or refunded

Return within 14 days

Characteristics - Selection criteria

Strip type :   Dynamic effects
Controller type :   With remote control
 DMX
Multi zones :   No
Voice assistants :   No

K-8000C LED controller with 8 outputs of 1024 pixels each, multi-protocol DMX/SPI.
Standalone operation with SD card supporting up to 32 animations.

Optimize your lighting installations with the K-8000C LED controller, designed to drive addressable LED strips and fixtures in demanding environments (architectural, event, decorative).
This controller offers precise management of lighting effects, supporting multiple protocols and wide compatibility.

Compatible with a wide range of LED chips (WS2811, WS2812, SK6812, TM1914, DMX512, UCS5603, APA102, etc.), capable of controlling up to 8 outputs with up to 1024 pixels each (or 512 DMX).​

Color control from 32 to 65,536 grayscale levels with software gamma correction for accurate rendering of effects and gradients.

Standalone or daisy-chained operation: connect multiple controllers up to 150 m apart, with enhanced isolation and anti-interference stability.​

Effect recording on SD card (compatible 128 MB to 32 GB), up to 32 embedded effect files, for local playback without computer.​

Supports RGB (3-channel), RGBW (4-channel), or monochrome pixels, with built-in test for 22 effects and DMX512 diagnostics.​

Third-party control via MODBUS (RS485) for integration into your home automation or industrial system.​

Standard TTL signal output or differential DMX512 for flexible adaptation to your equipment.

Usage: Ideal for dynamic lighting installations (façades, shop windows, stages, parks), suitable for both professionals and demanding installers.
Easily program DMX addressing or manage pixels with LedEdit-K software, adjust effect speed, and select the appropriate chip model using physical buttons. SD card management ensures flexible scenarios and reliability suitable for intensive environments.

Important:

Each 5-meter LED strip must be connected to the 5, 12, or 24V DC power supply (power circuit).
Failure to follow this rule may permanently damage the controller.

Product guaranteed 3 years
Equipment guaranteed 3 years.
Input voltage 5, 12 or 24V DC
Power consumption 5W
Strip type Dynamic effects (SPI)
Number of outputs 8
Number of pixels per output 1024 or 512 in DMX
Control software LedEdit-K
Memory card capacity from 128 MB to 32 GB (not included)
Max distance between controller and LED strip start 5 meters
Compatible ICs See documentation for full list
Remote control Radio frequency
Weight 800 grams
Dimensions 215 x 146 x 30 mm
Warranty 5 years
K8000C Manual K8000C Controller Manual

Reviews (0)

Viewed products