Led strip for swimming pool lighting 120 leds / m 856 Lumens / m waterproof IP68

Ref : S1C3528-120-IP68   [#34]
€41.25

5 meter led strip SMD3528 12V 120 leds / m 865 Lumens / m submersible IP68

Color
Quantity
On demand. Shipping 20 to 30 days.

Accessories to compose your kit

Led strips accessories

Power supply 12V 7A 84W

Power supply 12V 7A 84W

€14.58
Led dimmer with 144W remote control

Led dimmer with 144W remote control

€16.87
WiFi and Internet led controller

WiFi and Internet led controller

€21.68
1 channel DMX led controller for white or single color led strip

1 channel DMX led controller for white or single color led strip

€25.00
 

Products guaranteed for 3 or 5 years

 

Products shipped from France

  Satisfied or refunded

Return within 14 days

Characteristics - Selection criteria   What are the criteria for selecting an LED strip?

Ultra-low consumption :   No
Type of lighting :   Lighting
Color :   White
 Single color
Voltage :   12V
Waterproof :   Submersible IP68
Lighting direction :   Front view

Swimming pool  ,   basin   and   Jacuzzi  lighting   .
It is totally immersible (IP68) and provided with silicone resistant to water and chlorine. 
It does not yellow over time and does not crack. 

For an optimal result, the tape can be installed under the coping with downward lighting, or better still, with an angle of 45 ° allowing to light at the same time the bottom and the center of the swimming pool. 
Such a rendering can be made using an aluminum profile with an angle of 45 °.

The band is supplied with 12V DC, very low voltage compulsory for the use of electrical devices in swimming pools.

It can be cut in groups of 3 LEDs, or every 2.5 cm.

The 230V / 12V power supply must be installed in a room sheltered from the elements, in the technical room for example. 
The optional drives or controllers are not waterproof and must be installed near the power supply (technical room).

If the tape is cut, it is imperative to ensure a total seal by using specific end pieces, glued with special swimming pool silicone. 
IP68 led strips can be custom made, to your diemsnions, directly at the factory. Allow 2 to 3 weeks for completion.

Compose your ready-to-use kit

Ribbon only
Led tape
For the ribbon to work, you must have a    12V 60W minimum  power supply  . If you don't already have one, you need to add a power supply to the must-have accessories. Otherwise, you can purchase the ribbon on its own.
Power supply kit + ribbon
Led power supply + Led tape
Minimal kit to operate your led strip. It connects to the 230V sector and the led strip to the 12 / 24V output of the power supply.
Add the  power supply   to the list of accessories.
Power supply kit + dimmer + ribbon
Led power supply +   led dimmer + Led tape
To compose this kit, you must add to the accessories:
  • - 1 power supply
  • - 1 dimmer with remote control
You will get a complete kit supplied with a   remote control   to turn on, off and vary the light intensity using the radio-frequency remote control.
Power supply kit + Wifi dimmer + ribbon
Led power supply +   wifi led dimmer + Led tape
To compose this kit, you must add to the accessories:
  • - 1 power supply
  • - 1 WiFi dimmer
With this complete kit, you will be able to turn on, off and vary the light intensity in   Wifi   using your phone or tablet.
Power supply kit + DMX dimmer + ribbon
Led power supply +   DMX led dimmer + Led tape
To compose this kit, you must add to the accessories:
  • - 1 power supply
  • - 1 DMX dimmer
Complete kit working in DMX (except console). The  DMX controller  allows you to turn on, off and vary the light intensity according to the signal sent by your DMX console. 1 single channel is necessary to drive the led strip.
LTech brand controller intended for professionals for  intensive and durable use .

Choose waterproofing

IP20 Not waterproof. Suitable for indoor use (living rooms, bedrooms, verandas), except kitchens and bathrooms.  
IP65 Resistant to water splashes and humid environments. Can be installed in a kitchen, bathroom or outdoors.  
IP68 Submersible. Can be used in swimming pools, SPA or ponds.

Product guaranteed for 3 years
Equipment guaranteed for 3 years intended for professionals and individuals for intensive use.
Supply voltage 12V DC
Led type SMD 3528
Number of leds per meter 120
Colors Natural white 5000K
Warm white 3000K, cold white 7000K
red, green, blue, yellow, pink, purple, orange.
Brightness 865 Lumens per meter (in cool white)
850 Lumens per meter in natural white
810 Lumens per meter in warm white
Efficiency 90 Lumens per Watt
Consumption 9.6W per meter
Dimmable Yes (PWM)
Mitigation 2% after 6000 hours
SHOUT 80
Illumination angle 120 °
Lifetime 50,000 hours (at 45 ° C)
Sealing Submersible IP68
Dimensions 5000 x 12 x 5 mm
Cutout Every 2.5 cm
Temperature range -25 to 45 ° C
PCB 1 oz (35u) copper
Adhesive 3M VHB
Certifications CE, RoHS
EN60598-2-20: 2015, EN 60598-1: 2015, EN 62471: 2008, EN 62493: 2015 and EN 62031: 2008 + A1: 2013 + A2: 2015
Guarantee 3 years

Wiring of white ribbon with single color ribbons

These headbands, the simplest, only have 2 threads (+ and -).
They can be connected directly to the 12 or 24V power supply. In this case, the wall switch in your home will be used to turn the lighting on and off.

Connection of a single color led tape on power supply

They can be coupled to a dimmer to turn on, off and vary the brightness with a remote control.

Connection of a single color led tape with dimmer

With the exception of certain models (specified in the product sheet), LED strips can only have a maximum length of 5 meters.
Beyond this length, there would be a loss of light intensity after the first 5 meters.

To overcome this, it is possible to have several lengths of 5 meters (or less), one after the other, by connecting them in parallel to the power supply or to the controller.

Connection of 2 led strips in parallel

Here is the wiring diagram of several bands with the use of a dimmer. The latter will act on all the ribbons, including those connected after the amplifier.

Connection of 2 led strips in parallel with amplifier

Precautions to be taken when handling and installing an led tape

The led strips can be bent lengthwise by describing a radius of at least 5 cm.
Under no circumstances can they be folded sideways.

If you have to make 90 ° angles, it is imperative to cut the tape into sections and connect them, either with a suitable angle connector, or better, by soldering flexible cable (flat ribbon) between the 2 sections.

led strips with 90 ° angles

Do not bend the led strips or subject them to distortion:
Precautions to take for the manipulation of led strips

Choosing a led strip

How to choose the led strip best suited to your needs?

To quickly and easily find the led strip that best suits
your lighting project, consult our guide

Reviews (0)