Led strip RGB wall washer 42 leds / m 264 Lumens / m waterproof

Ref : SWASH42RGB-IP67   [#86]
€187.00

Led strip RGB wall lick of 5 meters, 24V 264 Lumens / m (in warm white), waterproof IP67

Mounting
Quantity
On demand. Shipping 20 to 30 days.

Accessories to compose your kit

Led strips accessories

24V 5A 120W power supply

24V 5A 120W power supply

€11.46
RGB led controller with 10A remote control

RGB led controller with 10A remote control

€15.08
WiFi and Internet led controller

WiFi and Internet led controller

€21.68
3-channel DMX led controller for RGB led strip

3-channel DMX led controller for RGB led strip

€25.00
 

Products guaranteed for 3 or 5 years

 

Products shipped from France

  Satisfied or refunded

Return within 14 days

Characteristics - Selection criteria   What are the criteria for selecting an LED strip?

Ultra-low consumption :   No
Type of lighting :   Atmosphere and decor
Color :   Multicolored (RGB)
Voltage :   24V
Waterproof :   Waterproof IP67
Lighting direction :   Front view

This led tape is fitted with special lenses to achieve a Wall washer effect.
It allows mood lighting on a facade or a wall up to 2.50 meters high, thanks to its 30 ° lighting angle.

The strip is supplied with 24V DC and can be cut every 166.6 mm.

Waterproof IP67, it can be used both indoors and outdoors.
Not suitable for swimming pools, ponds and other places where the strip is submerged.

The banner can be installed:

  • - With 3M double-sided tape (indoors only)
  • - With silicone screw clips (10 per tape)
  • - With metal screw fasteners (10 per tape)
  • - With screw-on aluminum profiles (5 bars of 1 meter)
  • - With profiles + adjustable angle fixings ( Optimal solution recommended ). 5 bars of 1 meter + 10 fixings.

The lighting height depends on the installation distance:

  • - 5 cm from the wall for lighting over 1 meter
  • - 10 cm from the wall for lighting over 1.50 meters
  • - 20 cm from the wall for lighting over 2 meters
  • - 30 cm from the wall for lighting over 2.50 meters

Angle adjustable brackets (optional) allow easy adjustment of wall lighting.

This led strip requires an RGB controller to be able to be driven.

Compose your ready-to-use kit

Ribbon only
Ribbon led
For the ribbon to work, you must have a minimum 24V 40W power supply . If you don't already have one, you need to add a power supply to the must-have accessories. Otherwise, you can purchase the ribbon on its own.
Power supply + ribbon kit
Led power supply + Led ribbon
Minimal kit to operate your led strip. It connects to the 230V sector and the led strip to the 24V output of the power supply.
Add the power supply in the list of accessories.
Power supply + controller + ribbon kit
Led power supply + led controller + Led ribbon
To compose this kit, you must add to the accessories:
  • - 1 power supply
  • - 1 RGB controller with remote control
You will get a complete kit supplied with a remote control to turn on, off, vary the light intensity and change colors using the radio-frequency remote control.
Power supply kit + Wifi controller + ribbon
Led power supply + wifi led controller + Led ribbon
To compose this kit, you must add to the accessories:
  • - 1 power supply
  • - 1 RGB Wifi controller
With this complete kit, you will be able to turn on, off, vary the light intensity and change colors in Wifi using your phone or tablet.
Power supply kit + DMX controller + ribbon
Led power supply + DMX led controller + Led ribbon
To compose this kit, you must add to the accessories:
  • - 1 power supply
  • - 1 DMX controller
Complete kit working in DMX (except console). The DMX controller allows you to turn on, off, vary the light intensity and change the colors according to the signal sent by your DMX console. 3 channels are needed to drive the led strip.
LTech brand controller intended for professionals for intensive and durable use .

Choose waterproofing

IP20 Not waterproof. Suitable for indoor use (living rooms, bedrooms, verandas), except kitchens and bathrooms.
IP65 Resists water splashes and humid environments. Can be installed in a kitchen, bathroom or outdoors.
IP68 Submersible. Can be used in swimming pools, SPA or ponds.

Product guaranteed 3 years
Equipment guaranteed for 3 years intended for professionals and individuals for intensive use.
Supply voltage 24V DC
Type of led RGB Led (3 in 1) + lens
Number of leds per meter 42
Colors RGB
Brightness 264 Lumens per meter in warm white 3000K.
Efficiency 43 Lumens per Watt
Consumption 6.2W per meter
Dimmable Yes (PWM)
Attenuation 2% after 6000 hours
CRI -
Lighting angle 30 °
Lifetime 50,000 hours (at 25 ° C)
Waterproofing Waterproof IP67
Dimensions 5000 x 18.5 x 9.5 mm
Cutout Every 166.6 mm
Temperature range - 25 to 55 ° C
Humidity 0 to 95 ° C
PCB 1 oz (35u) copper
Certifications CE, RoHS
EN55015: 2013 / A1: 2015
EN61547: 2009
EN61000-3-2: 2014
EN61000-3-3: 2013
Guarantee 3 years

Wiring of multicolored RGB strips

This strip requires an RGB controller to be driven. It allows you to turn on, off, and vary the light intensity as well as the colors, including white.

The 4 wires, black (+), red (R), green (G) and blue (B) are to be connected as follows:

Connection of an RGB led tape

Wiring diagram for several strips whose total length exceeds 5 meters. The cable used is 4 wires (+, red (R), green (G) and blue (B).

Connection of 2 RGB led strips in parallel with amplifier

Precautions to be taken when handling and installing an led tape

The led strips can be bent lengthwise by describing a radius of at least 5 cm.
Under no circumstances can they be folded sideways.

If you have to make 90 ° angles, it is imperative to cut the tape into sections and connect them, either with a suitable angle connector, or better, by soldering flexible cable (flat ribbon) between the 2 sections.

led strips with 90 ° angles

Do not bend the led strips or subject them to distortion:
Precautions to take for the manipulation of led strips

Choosing a led strip

Choosing a led strip 

How to choose the led strip best suited to your needs?

To quickly and easily find the led strip that best suits
your lighting project, consult our guide

Reviews (0)