Flexible multicolored neon with dynamic effects 16 x 16 mm 60 leds/m - 1200 Lumens/m - 3 leds/pixel - Front lighting

Ref : NSPI16X16F-60-IP65   [#114]
€155.38

Multicolored flexible neon of 5 meters Magic (dynamic effects) 16 x 16 mm, 60 leds/m, 1200 Lumens/m, 3 leds/pixel, front lighting, waterproof IP65

Quantity
On demand. Shipping 20 to 30 days.

Accessories to compose your kit

Led strips accessories

Power supply 12V 7A 84W

Power supply 12V 7A 84W

€14.58
Controller for dynamic effect led strips 300 programs

Controller for dynamic effect led strips 300 programs

€8.71
Controller for WiFi dynamic effect led ribbons and Google and Alexa voice assistants

Controller for WiFi dynamic effect led ribbons and Google and Alexa voice assistants

€15.81
DMX controller for LTECH dynamic effect led strips

DMX controller for LTECH dynamic effect led strips

€68.98
 

Products guaranteed for 3 or 5 years

 

Products shipped from France

  Satisfied or refunded

Return within 14 days

Characteristics - Selection criteria   What are the criteria for selecting an LED strip?

Ultra-low consumption :   No
Type of lighting :   Atmosphere and decor
 Lighting
Color :   Multicolor + dynamic effects
Voltage :   12V
Waterproof :   Waterproof IP65
Pixel size :   3 leds / pixel
Lighting direction :   Front view

Multicolored RGB flexible neon with dynamic effects (Magic) allowing you to create colorful ambient lighting with active animations.
It allows you to obtain rainbow effects with gradients, chases, scrolls and a whole host of other animations.
Depending on the controller used, you can make the ribbon react to the rhythm of the music, and even program your own animations, à la carte.

This flexible neon is used to produce front lighting over a width of 16 mm, with a better distributed light than on a classic led strip, thanks to the opaque structure of the neon.
It is generally used to illuminate in a straight line, even on a rounded surface.

Flexible neon lights do not have double faces. They should be fixed with the clips provided.

The strip is powered by 12V DC and can be cut in groups of 3 leds, i.e. every 5 cm.
Waterproof IP65, it can be used outdoors without any problem.

The neon requires the use of a specific controller for Magic led strips.

This strip is controlled by groups of 3 LEDs (1 pixel).
Led strips of 5 meters can be chained together thanks to the clip connectors provided. The animation will extend over the total length of the connected strips, with however the limitation of the number of pixels managed by the chosen controller (see the characteristics of the controller according to your total length of strips).

Important: Be sure to supply each 5-meter strip with 12V (by connecting them directly to the power supply) independently of the controller. See login photo.

Compose your kit ready to use

Strip only
Led strip
For the ribbon to work, you must have a power supply 12V 100W minimum. If you do not already have one, you must add a power supply to the essential accessories. Otherwise, you can acquire the ribbon alone.
Power supply kit + ribbon
Led power supply + Led strip
Minimal kit to make your led strip work. It connects to the 230V mains and the led strip to the 12V output of the power supply.
Add the power supply to the list of accessories.
Power supply kit + controller + ribbon
Led power supply + led controller + Led strip
To compose this kit, you must add to the accessories:
  • - 1 power supply
  • - 1 dynamic effects controller 300 programs with remote control
You will get a complete kit that comes with a remote control to turn on, off and dim the light intensity and change the animations.
Power supply kit + Wifi controller + ribbon
Led power supply + led wifi controller + Led strip
To compose this kit, you must add to the accessories:
  • - 1 power supply
  • - 1 Wifi dynamic effects controller with remote control
With this complete kit, you can turn on, turn off, vary the light intensity, select animations, compose your programs, operate the tape to the rhythm of the music, with the remote control, in Wifi or with Google and Alexa voice assistants.
Power supply kit + DMX controller + ribbon
Led power supply + led DMX controller + Led strip
To compose this kit, you must add to the accessories:
  • - 1 power supply
  • - 1 DMX controller for led strip with dynamic effects
Complete kit operating in DMX (excluding console). The DMX controller allows you to control the LED strip, pixel by pixel, in order to obtain à la carte animations, according to the DMX sequences programmed on your console.
3 channels are required to drive a single pixel, or 60 channels per meter for this ribbon.
LTech brand controller for professionals for intensive and durable use.

Choose waterproofing

IP20Not waterproof. Suitable for indoor use (living rooms, bedrooms, verandas), excluding kitchens and bathrooms.
IP65 Resists splashing water and damp environments. Can be installed in a kitchen, bathroom or outdoors.
IP68Immersible. Can be used in swimming pools, SPA or ponds.

3 year warranty product
Hardware guaranteed for 3 years.
Power supply voltage 12V DC
Led type SMD5050
IC Type WS2811
Number of leds per meter 60
Number of CIs per meter 20
Number of leds per pixel 3
Colors multicolor RGB
Brightness 1200 Lumens per meter (in white)
Efficacy 80 Lumens per Watt
Consumption 15W per meter
Dimmable Yes (PWM)
Attenuation 2% after 6000 hours
Min curvature diameter 20cm
CRI 80
Illumination angle 120°
Lifespan 50000 hours (at 45°C)
Sealing Waterproof IP65
Dimensions 5000x16x16mm
Cut Every 5cm
Temperature range -25 to 45°C
PCB 1oz (35u) copper
Fixing by clips. 4 supplied per meter
Certifications CE, RoHS
EN IEC55015:2019
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
EN 61547:2009
EN 60598-2-21:2015
EN 60598-1:2015+A1:2018
EN 62471:2008
EN 62493:2015
EN IEC 62031:2020
Warranty 3 years

Flexible neon lights with front lighting

This type of tape called Top View can only be bent lengthwise, with front lighting.
It can be placed on a rounded surface, for example, around a column or a bar counter, with a face light.

Efficacy (Lumens/W output) and brightness are much better than side-lit neon lights.

Front lit top view flexible neon

The multicolored ribbons with dynamic effects (WS2811)

This headband requires a specific controller to run the light animation programs.

The 3 wires, red (+), green (DAT), and black or white (GND/-) are to be connected at the start of the ribbon (see the direction of the arrows on the strip) as follows:

Connection of a WS2811 type dynamic effect led strip

When several 5-meter strips are chained one after the other, it is essential to connect the additional strips to the 12V power supply.
The reel has 3 wires, often connected to a clip-on connector (control circuit), as well as 2 additional white and red wires (power circuit), used to connect to the power supply.
Here is how to do the wiring:

Connection of several WS2811 type dynamic effect led strips

Precautions to take when handling and installing a led strip

The led strips can be curved lengthwise by describing a minimum radius of 10 cm.
Under no circumstances can they be folded sideways.

If you need to make 90° angles, it is imperative to cut the tape into sections and connect them, either with a suitable angle connector, or better, by welding flexible cable (flat cable) between the 2 sections.

led strips with 90° angles

Do not bend the led strips or distort them:
Precautions to take for handling led strips

Choosing a led strip

Choosing a led strip 

How to choose the led strip best suited to your needs?

To quickly and easily find the led strip that best suits
your lighting project, consult our guide

Reviews (0)